铸造技术2017，Vol.38Issue(11)：2753-2756,4.DOI:10.16410/j.issn1000-8365.2017.11.053
方坯连铸结晶器三维传热模拟
Three Dimensional Heat Transfer Simulation of Continuous Casting Square Mold
王泽鹏 1蔡宗英 2朱立光 1刘增勋 1张仕骏 2肖鹏程1
作者信息
- 1. 华北理工大学冶金与能源学院,河北唐山063000
- 2. 河北省高品质钢连铸工程技术研究中心,河北唐山063000
- 折叠
摘要
Abstract
Using the finite element software ANSYS,the squire billet continuous casting mold as the research object,based on the node temperature transfer method,using the ANSYS contact analysis technology to establish billet continuous casting crystallizer three-dimensional fmite element model of the transient heat transfer,the distribution of the blank shell and the mould was analyzed.The results show that the copper wall temperature in the curved surface area is lower,and the upper mouth is close to the temperature of cooling water in the water seam.Meniscus under 50 mm copper mould wall temperatures is the highest,up to 157 ℃;the shape of the copper tube is basically the same as that of the copper tube in the actual production.The surface of casting billet is removed from the angular part 30 mm,and the surface temperature of the slab is uniform.关键词
三维传热/结晶器/有限元/连铸Key words
three-dimensional heat transfer/mold/finite element/continuous casting分类
矿业与冶金引用本文复制引用
王泽鹏,蔡宗英,朱立光,刘增勋,张仕骏,肖鹏程..方坯连铸结晶器三维传热模拟[J].铸造技术,2017,38(11):2753-2756,4.
