铸造技术2017，Vol.38Issue(11)：2781-2784,4.DOI:10.16410/j.issn1000-8365.2017.11.061
汽车桥壳铁型覆砂铸造
Axle Shells Prepared by Sand-faced Metal Mould Casting
夏小江 1潘东杰 1刘同帮 1洪华泽 1胡洪斌1
作者信息
- 1. 浙江省机电设计研究院有限公司,浙江杭州310051
- 折叠
摘要
Abstract
According to the structure of the middle and rear axle shells and the material characteristics of QT450-10,the sand-faced metal mould and a single casting process was adopted,and the process was analyzed and optimized by computer simulation.The results show that the quality of the mould,the chemical composition of the molten,the spheroidizing treatment and inoculation process and the opening time are the key to obtain the qualified castings.At the same time,the design of sand-faced metal mould casting line must be combined with the characteristics of the products process.关键词
桥壳/铁型覆砂铸造/计算机模拟/生产线Key words
axle shell/sand-faced metal mould casting/computer simulation/production line分类
矿业与冶金引用本文复制引用
夏小江,潘东杰,刘同帮,洪华泽,胡洪斌..汽车桥壳铁型覆砂铸造[J].铸造技术,2017,38(11):2781-2784,4.
