液压与气动Issue(8)：8-13,6.DOI:10.11832/j.issn.1000-4858.2017.08.002
水压柱塞泵配流盘阻尼槽结构优化及试验研究
Optimization and Experimental Research for Silencing Groove Structure of Valve Plate in Water Hydraulic Piston Pump
摘要
Abstract
In this study,a U shaped silencing groove structure of the water hydraulic piston pump is studied.In order to decrease the fluid vibration,pressure and flow ripples of the water hydraulic piston pump,the pressure and flow characteristics of the pump with different silencing groove geometries are investigated through CFD simulation.And the optimal silencing groove structural parameter of the valve plate is selected to abtain the minimum pressure and flow ripple rates.The results based on the CFD simulation show that when the width,depth of the silencing groove,and the pre-compression angle of the valve plate are respectively are set as 2 mm,0.8 mm and 11.8°,the pressure and flow ripple rates of the water hydraulic piston pump are the minimum.The vibration test of the water hydraulic piston pump with different silencing grooves is conducted,and the experimental results indicate that the optimal design of the silencing groove can effectively reduce the vibration on the port flange and the shell of the pump.关键词
水压轴向柱塞泵/阻尼槽/流量脉动/振动试验Key words
water hydraulic axial piston pump/relief groove/flow ripple/vibration test分类
机械制造引用本文复制引用
侯威,聂松林,尹方龙..水压柱塞泵配流盘阻尼槽结构优化及试验研究[J].液压与气动,2017,(8):8-13,6.基金项目
国家自然科学基金(51375018) （51375018）
北京市自然科学基金(3164039) （3164039）
中国博士后科学基金(2015M580946) （2015M580946）
