起重运输机械Issue(10)：106-109,4.
基于ABAQUS的索道抱索器轴套过盈装配分析
邢建国 1尹世琛 2汤秀丽 1张玉2
作者信息
- 1. 北京起重运输机械设计研究院 北京 100007
- 2. 北京市自动化物流装备工程技术研究中心 北京 100007
- 折叠
摘要
Abstract
Shaft sleeve of detachable grip of cableway is usually installed by means of interference fit, namely, press-fitting shaft sleeve with certain amount of interference into shaft hole using cylinder. In this paper, an interference fit model is established based on ABAQUS to check strength of the sleeve under different interference conditions, and changes in axial reaction of the sleeve are also analyzed. The model can provide strong support for using shaft sleeve and selecting cylinder bores.关键词
索道/抱索器/轴套/过盈装配/应力/轴向反力Key words
cableway/detachable grip/shaft sleeve/interference fit/stress/axial reaction分类
机械制造引用本文复制引用
邢建国,尹世琛,汤秀丽,张玉..基于ABAQUS的索道抱索器轴套过盈装配分析[J].起重运输机械,2017,(10):106-109,4.
