中国电机工程学报2017，Vol.37Issue(21)：6198-6208,11.DOI:10.13334/j.0258-8013.pcsee.171412
基于磁通切换电机的绕组开放式发电系统的建模与参数设计
Modeling and Parameters Designing of the Open Winding Generator System Based on the Flux-switching Generator
摘要
Abstract
For the distributed power system, open winding topology can simplify the structure and reduce the cost. By comparing the different generator's magnetic circuit and mathematical model, a permanent flux-switching generator was applied to the open winding generator system. The other focus of this paper was the generation and suppression of the system's inherent output voltage ripple. This paper established a small signal model of the system, then drew the impedance's specific analytical expressions based on the averaged switching model. This paper used Middlebrook criterion to analyze the source and load impedances' matching, the ability of ripple suppression under different system parameters. Then a fast system parameter design method was proposed. The experiments were carried out on a flux-switching generator system. The results illustrate the validity and effectiveness of the proposed method.关键词
磁通切换电机/绕组开放式/系统建模/稳定性分析/阻抗匹配/磁通切换发电系统Key words
flux-switching generator/open winding/modeling of system/stability analysis/impedance matching/flux-switching generator system分类
信息技术与安全科学引用本文复制引用
王子禹,王宇,郜羚,肖文妍,耿亮..基于磁通切换电机的绕组开放式发电系统的建模与参数设计[J].中国电机工程学报,2017,37(21):6198-6208,11.基金项目
国家自然科学基金项目(51407090,51741705) （51407090,51741705）
江苏省自然科学基金项目(BK20140815).Project Supported by National Natural Science Foundation of China (51407090, 51741705) （BK20140815）
Natural Science Foundation of Jiangsu Province (BK20140815). （BK20140815）
