计算机应用与软件2017，Vol.34Issue(10)：35-39,5.DOI:10.3969/j.issn.1000-386x.2017.10.006
基于RFID的自动络筒机落纱小车对位系统分析与设计
ANALYSIS AND DESIGN OF AUTOMATIC WINDER DOFFING CAR ALIGNMENT SYSTEM BASED ON RFID
摘要
Abstract
Aiming at the automatic winder doffer autonomous development requirements and in combination with the latest development trend of Radio Frequency Identification,the automatic doffer real-time alignment system based on RFID technology is designed to realize the real-time monitoring and data transmission of ingot coordinates of the doffing car.This study mainly describes the overall design scheme of the system,and discusses the design example with MFRC632 chip as tag reading module system.First,we uniformly pasted tag onto the winder doffing car orbit.The tag reader system was fixed on the track along the doffing trolley.Then,the system could read numbering of the current tag in dolly moving process and ensured the ingot position of the dolly.Moreover,the car coordinates would be transmitted to the PC in order to control the speed of doffer car.The experimental results show that this alignment system can 100％ complete locate accurately,under the condition of the Reader and Tag installation distance 20 mm and parallel placement,doffing car speed up to 110 mm/s,which adapts to the current mainstream modification of automatic doffer car.关键词
落纱小车/RFID/对位系统/读卡器/识别率Key words
Automatic doffer/RFID/Alignment system/Reader/Recognition rate分类
信息技术与安全科学引用本文复制引用
马丹丹,王静安,汤继忠,刘基宏..基于RFID的自动络筒机落纱小车对位系统分析与设计[J].计算机应用与软件,2017,34(10):35-39,5.基金项目
江苏省高校优势学科建设工程资助项目(PAPD) （PAPD）
教育部江南大学自主科研重点项目(JUSRP51417B) （JUSRP51417B）
