流体机械2017，Vol.45Issue(11)：5-9,51,6.DOI:10.3969/j.issn.1005-0329.2017.11.002
含尘烟气换热除尘一体化性能试验研究
Experimental Study on the Integrated Performance of Heat Exchange and Dust Removal of Industrial Flue Gas
摘要
Abstract
In order to remove the fine dust of industrial flue gas,and recover the waste heat at the same time. we put forward an experimental study on the integrated performance of heat exchange and dust removal of industrial flue gas by cyclone for the first time. The key factors such as the inlet velocity,the insertion depth of the exhaust pipe,the pressure drop,the dust concentration, the inlet temperature and the flow rate of the cooling medium were studied to determine the optimum parameters. The results show that,with the increase of air inlet velocity,the dust removal efficiency increases at first and then decreases,reaching the maximum at 32 m3/h. When the ratio of the depth of the exhaust pipe to the inlet height is about 1.1,the dust removal efficiency reaches the maximum. With the increase of air inlet velocity,inlet temperature and the flow rate of the cooling medium,the heat transfer efficiency decreases gradually.关键词
旋风分离器/除尘/换热/一体化/节能环保Key words
cyclone/dust removal/heat exchange/integration/energy saving and environmental protection分类
机械制造引用本文复制引用
张艳红,刘安林,马良,王依谋,何梦雅..含尘烟气换热除尘一体化性能试验研究[J].流体机械,2017,45(11):5-9,51,6.基金项目
国家重点研发计划项目(2016YEC0204500) （2016YEC0204500）
