轻工机械2017，Vol.35Issue(6)：68-71,76,5.DOI:10.3969/j.issn.1005-2895.2017.06.015
新型粉末包装机往复式横封机构设计
Design of Reciprocating Transverse Sealing Mechanism for New Powder Packaging Machine
摘要
Abstract
The traditional reciprocating transverse seal mechanism has cam and cylinder type.Cam type suffered vibration and noise caused by unreasonable cam profile, cylinder type was largely impacted and easily caused sealing problems when the cylinder speed was changed.A new type of powder packaging machine for reciprocating transverse sealing mechanism was presented.By combination of the analytical method and the three-dimensional software, the research on the agency was carried out.The mathematical model of the reciprocating transverse sealing mechanism of the powder packaging machine was established to carry out the stress analysis and kinematic analysis of the transverse head of the transverse sealing mechanism.The three-dimensional modeling through SolidWorks software was established to simulate the kinematics of cross-head.The results show that the transverse seal mechanism has the advantages of smooth, lower noise, and it can be easily adjusted the speed to meet the requirements of transverse seals for variety length of bags.关键词
包装机/横封机构/运动仿真/SolidWorksMotion软件Key words
packaging machine/transverse seal mechanism/motion simulation/SolidWorks Motion software分类
通用工业技术引用本文复制引用
邢亚飞,金晓怡,季春云..新型粉末包装机往复式横封机构设计[J].轻工机械,2017,35(6):68-71,76,5.基金项目
上海工程技术大学研究生科研创新项目(E3-0903-16-01163). （E3-0903-16-01163）
