铸造2017，Vol.66Issue(11)：1201-1203,3.
改性SiCp在无缸套灰铸铁气缸体材质开发中的应用
Application of Modified SiCp to the Gray lron Development for Cylinder Body Without Cylinder Sleeve
王春风 1梁清延 2高宏2
作者信息
- 1. 大连交通大学材料科学与工程学院,辽宁大连116028
- 2. 广西玉柴机器股份有限公司,广西玉林537005
- 折叠
摘要
Abstract
For the cylinder without sleeve can not meet the design requirements of wear resistance, the thin-wall cylinder sleeve has to been inserted in the cylinder bore. By the addition of modified SiCp to HT250, the rigidity and wear resistance of the material were enhanced. The addition effects of the SiCp were verified by the friction and wear test, cylinder hole deformation test and bench test. The results show that mated with piston ring, the total wearing capacity of HT250 with trace modified SiCp is 2.66μm, significantly less than 3.15μm of the general HT250, slightly less than 2.71μm of the sleeve material. The bore deformation of cylinder made of HT250 with trace modified SiCp meets the design requirements. The key parameters of bench test are superior to that of the cylinder with sleeve.关键词
改性SiCp/无缸套气缸体/灰铸铁Key words
modified SiCp/cylinder without cylinder sleeve/gray iron分类
矿业与冶金引用本文复制引用
王春风,梁清延,高宏..改性SiCp在无缸套灰铸铁气缸体材质开发中的应用[J].铸造,2017,66(11):1201-1203,3.
