电焊机2017，Vol.47Issue(11)：52-55,4.DOI:10.7512/j.issn.1001-2303.2017.11.10
基于软件集成环境下的焊接模拟仿真
Welding simulation in software integration environment
张立平 1张贵芝 2吴斌 1周鹏翔 2占小红1
作者信息
- 1. 江苏徐州工程机械研究院,江苏徐州221004
- 2. 徐工集团工程机械有限公司高端工程机械智能制造国家重点实验室,江苏徐州221004
- 折叠
摘要
Abstract
In the process of welding simulation,it was difficult to convert data among different software,and also needed to set a single load case for each welding seam,which made the finite element pre-processing complicated and low efficiency.The PRO/E,Hyper Mesh and MSC Marc software were synthetically applied in the whole process of MAG welding from geometric modeling,meshing,model setting,calculating and analyzing to result processing based on their respective characteristic and secondary development function,and achieved data exchange between different software.Examples of butt plates welding showed that the simulation of welding process through software integration made full use of the advantages of the existing software,decreased the workload of CAE pretreatment,and improved the efficiency of analysis.关键词
二次开发/TCL/TK/软件集成/焊接仿真Key words
secondary development/TCL/TK/software integration/welding simulation分类
矿业与冶金引用本文复制引用
张立平,张贵芝,吴斌,周鹏翔,占小红..基于软件集成环境下的焊接模拟仿真[J].电焊机,2017,47(11):52-55,4.
