电焊机2017，Vol.47Issue(11)：56-59,4.DOI:10.7512/j.issn.1001-2303.2017.11.11
接触式引弧方式在变极性TIG焊中的应用
Application of touch arc ignition strategy for variable polarity TIG welding
姚瑶 1姚河清2
作者信息
- 1. 长沙学院机电工程学院,湖南长沙410003
- 2. 河海大学机电学院,江苏常州213022
- 折叠
摘要
Abstract
Based on variable polarity TIG welding power system platform in the dual inverter has been set up on the power supply,in order to ensure the normal use of the design,the contact type for a variable polarity power supply TIG welding arc,the whole process is divided into short circuit arc stage,arc stage and the current slow rise three stages.The current value and speed of the short stage and the main stage can be changed as needed.The experiments have proved that the arc ignition is suitable for not only the variety polarity source but also can apply on pulse current source,without any obvious tungsten weariness and arc extinguish,and the arc ignition success rate is quite high.关键词
变极性/接触式引弧/钨极烧损Key words
variable polarity/touch arc ignition/tungsten weariness分类
矿业与冶金引用本文复制引用
姚瑶,姚河清..接触式引弧方式在变极性TIG焊中的应用[J].电焊机,2017,47(11):56-59,4.
