| 注册
首页|期刊导航|金刚石与磨料磨具工程|人造金刚石提纯及氧化石墨制备一体化工艺研究

人造金刚石提纯及氧化石墨制备一体化工艺研究

杨碧野 许红亮 李振宇 王海超 丁赛赛

金刚石与磨料磨具工程2017,Vol.37Issue(6):37-40,4.
金刚石与磨料磨具工程2017,Vol.37Issue(6):37-40,4.DOI:10.13394/j.cnki.jgszz.2017.6.0006

人造金刚石提纯及氧化石墨制备一体化工艺研究

Study on integration process of synthetic diamond purification and graphite oxide preparation

杨碧野 1许红亮 1李振宇 2王海超 2丁赛赛1

作者信息

  • 1. 郑州大学材料科学与工程学院 ,郑州450001
  • 2. 黄河旋风股份有限公司 ,河南长葛461500
  • 折叠

摘要

Abstract

Magnetic separation method , Hummers method and sedimentation separation method were used to purify the synthetic diamond tails obtained through shaking table separation . The X-ray diffractometer , Raman spectrometer and scanning electron microscope were used to characterize the phase compositions and the microstructures of the obtained samples . The results indicate that the obtained diamond has high purity and that the recovery rate is close to 100% . At the same time , the graphite in the synthetic diamond tails is converted to graphite oxide , which saves resources and turns waste into treasure .

关键词

人造金刚石/提纯/氧化石墨/制备

Key words

synthetic diamond/purification/graphite oxide/preparation

分类

化学化工

引用本文复制引用

杨碧野,许红亮,李振宇,王海超,丁赛赛..人造金刚石提纯及氧化石墨制备一体化工艺研究[J].金刚石与磨料磨具工程,2017,37(6):37-40,4.

基金项目

河南省科技攻关计划项目(No .172102310125) (No .172102310125)

金刚石与磨料磨具工程

OA北大核心CSTPCD

1006-852X

访问量0
|
下载量0
段落导航相关论文