金刚石与磨料磨具工程2017，Vol.37Issue(6)：41-44,4.DOI:10.13394/j.cnki.jgszz.2017.6.0007
金刚石磨料表面多孔结构的制备
Fabrication of porous structure on diamond abrasive surface
范波 1徐帅2
作者信息
- 1. 郑州磨料磨具磨削研究所有限公司 ,郑州450001
- 2. 超硬材料磨具国家重点实验室 ,郑州450001
- 折叠
摘要
Abstract
SEM and EDS characterization have provided insight into the chemical composition and microstructure of a particular kind of HPHT synthesized diamond abrasive . Fine dispersion of micron titanium compound particles was observed both on surface and inside the diamond grains . The particles were found to be removed from the grain surface by oxidation and subsequent acid corrosion .After such treatment , porous structures were formed on the diamond grain surface . The possible beneficial effect of the porous structure , such as self-sharpening performance and high grinding efficiency of diamond wheel is suggested .关键词
金刚石/磨料/砂轮/自锐/多孔Key words
diamond/abrasive/grinding wheel/self-sharping/porous分类
化学化工引用本文复制引用
范波,徐帅..金刚石磨料表面多孔结构的制备[J].金刚石与磨料磨具工程,2017,37(6):41-44,4.
