天然气与石油2017，Vol.35Issue(6)：43-47,5.DOI:10.3969/j.issn.1006-5539.2017.06.008
Civil 3D曲面模型导入PDMS方法研究
Research on the Method of Importing Civil 3D Surface Model into PDMS
郭姣 1汪坤 2唐丹1
作者信息
- 1. 中国石油工程建设有限公司西南分公司, 四川 成都 610041
- 2. 中国电力工程顾问集团西南电力设计院有限公司, 四川 成都 610021
- 折叠
摘要
Abstract
With the development of digital design,3D model is frequently introduced in engineering design. PDMS is a widely used digital collaborative design software, yet with some limitations in plot plan (such as dealing with natural terrain, etc. ). The prevailing software of 3D modeling in the field of plot plan is Civil 3D. To import all kinds of 3D models created by civil 3D into PDMS, so as to realize the collaborative design of plot plan and other disciplines, the secondary development of Civil 3D and PDMS is studied. By extracting the information of Civil 3D surface, the surface information is written into a model file composed of Programmable Macro Language ( PML) , and loaded directly in PDMS to realize the import of surface information. After the introduction, the surface model of Civil 3D and PDMS was compared. It was concluded that through the secondary development, the surface model in Civil 3D could be accurately presented to PDMS to meet the collaborative design.关键词
Civil3D/三维设计/总图设计/PDMS/PML/二次开发Key words
Civil 3D/3D modeling/Plot plan/PDMS/PML/Secondary development引用本文复制引用
郭姣,汪坤,唐丹..Civil 3D曲面模型导入PDMS方法研究[J].天然气与石油,2017,35(6):43-47,5.
