| 注册
首页|期刊导航|东南大学学报(自然科学版)|PVDF涂层织物拉伸力学性能试验研究

PVDF涂层织物拉伸力学性能试验研究

刘平 吴刚 唐柏鉴 周道传 缪玮

东南大学学报(自然科学版)2017,Vol.47Issue(6):1195-1200,6.
东南大学学报(自然科学版)2017,Vol.47Issue(6):1195-1200,6.DOI:10.3969/j.issn.1001-0505.2017.06.018

PVDF涂层织物拉伸力学性能试验研究

Experimental study on mechanical properties of PVDF textile

刘平 1吴刚 2唐柏鉴 1周道传 3缪玮2

作者信息

  • 1. 东南大学土木工程学院,南京210096
  • 2. 江苏科技大学土木工程与建筑学院,镇江212005
  • 3. 苏州科技大学土木工程学院,苏州215009
  • 折叠

摘要

Abstract

To obtain the constitutive model of membrane,the uniaxial tensile failure experiments of SH-1050P textile were carried out using the angle of yam and tensile direction as the parameters.Besides,the biaxial tensile test under biaxial loading with multiple loading ratio was also conducted to obtain the complete uniaxial/biaxial test data.The analytical formula about the relationship between the elastic modulus and the angle was derived based on the assumption that the strains of all the membranes are uniform and there is no slippage between ply and yam,which can explain the experimental phenomena well.Meanwhile,the biaxial elastic modulus and Poisson's ratio under different proportional loading were obtained with the assumption of the membrane being a biaxial orthogonal elastic model under biaxial loading.The results show that the elastic modulus of the uniaxial test can be divided into the elasticity and plasticity stages according to the ultimate elastic strain of 2%.Both two elastic modulus values are proportional to 2 times of angle.As for the bi-axial test,the elastic modulus is the same as that of the uniaxial test when the loading ratio is 1 ∶ 1,and the discreteness of elastic modulus increases with the discreteness of the loading ratio.

关键词

膜材/双轴试验/力学性能/正交各向异性

Key words

membrane/bi-axial test/mechanical property/orthotropic

分类

建筑与水利

引用本文复制引用

刘平,吴刚,唐柏鉴,周道传,缪玮..PVDF涂层织物拉伸力学性能试验研究[J].东南大学学报(自然科学版),2017,47(6):1195-1200,6.

基金项目

国家自然科学基金资助项目(51508238)、江苏省博士后科研基金资助项目(1601014B). (51508238)

东南大学学报(自然科学版)

OA北大核心CSCDCSTPCD

1001-0505

访问量0
|
下载量0
段落导航相关论文