铸造技术2017，Vol.38Issue(12)：3009-3012,3020,5.DOI:10.16410/j.issn1000-8365.2017.12.058
电动汽车水冷机壳热芯盒电加热温度控制系统设计
Design of Electric Heating Temperature-control System for the Hot Core Box of Water-cooled Casing of Electric Vehicle
刘楚生 1韩伟 1黄凌森 1陈宇姗1
作者信息
- 1. 华南理工大学广州学院工程训练中心,广东广州510800
- 折叠
摘要
Abstract
The cylindrical sand core of motor casing was formed in five directions of core-shooting,so the hot core box mold must be divided into several parts.Through analyzing the forming elements for low pressure casting of sand core that was used in hollow circulation water-cooled structure of motor casing of electric vehicle,a temperature control system was designed.The system is mainly operated by PLC,which can control each mold's opening and closing,and the automatic shooting.It can also precisely controling the molding temperature of the sand core of the hot box,and the goal of sand shooting is achieved when each mold heats up to the preset temperature.The system changes the backward ways that rely on the experience of production workers to determine the warm-up time,time of core shooting and curing time and so on.Finally,it improves the quality and strength of the sand core,and ensure the qualification rate.关键词
机壳砂芯/热芯盒模具/温度控制/射芯时机Key words
sand core of casing/hot core box mold/temperature control/time of core shooting分类
矿业与冶金引用本文复制引用
刘楚生,韩伟,黄凌森,陈宇姗..电动汽车水冷机壳热芯盒电加热温度控制系统设计[J].铸造技术,2017,38(12):3009-3012,3020,5.
