液晶与显示2018，Vol.33Issue(1)：61-66,6.DOI:10.3788/YJYXS20183301.0061
基于FT600的USB3.0接口设计
Design of USB3.0 interface based on FT600
摘要
Abstract
In order to simplify the system for camera testing and reduce the cost,an USB3.0 interface based on FT600 of FTDI Company is designed.First,a brief introduction of the complexity for testing the camera with Camera link interface and the advantage for using USB3.0 interface is presented.Then an explanation for circuit design of the interface is showed,and according to the datasheet,the circuit design of the FT600 and the FPGA is accomplished.Finally,the FPGA is programmed by using the Verilog HDL and the USB3.0 interface is tested by using the software provided by the FTDI.Experi-mental results indicate that the work mode of the USB3.0 interface can be configured according to software,and the interface can transfer the data at 200 Mbyte/s.It can satisfy the camera test require-ments and simplify the system for testing.关键词
USB3.0/FPGA/FT600Key words
USB3.0/FPGA/FT600分类
信息技术与安全科学引用本文复制引用
陈涛,赵金宇,贾建禄..基于FT600的USB3.0接口设计[J].液晶与显示,2018,33(1):61-66,6.基金项目
国家自然科学基金资助项目(No.11603024) Supported by National Natural Science Foundation of China (No.11603024) （No.11603024）
