| 注册
首页|期刊导航|物理学报|光学元件波前畸变对驱动器光路设计的影响

光学元件波前畸变对驱动器光路设计的影响

徐林波 卢兴强 雷泽民

物理学报2018,Vol.67Issue(2):51-59,9.
物理学报2018,Vol.67Issue(2):51-59,9.DOI:10.7498/aps.67.20171877

光学元件波前畸变对驱动器光路设计的影响

Influence of phase error of optical elements on optical path design of laser facilities

徐林波 1卢兴强 2雷泽民1

作者信息

  • 1. 中国科学院上海光学精密机械研究所,高功率激光物理联合实验室,上海201800
  • 2. 中国科学院大学,北京100049
  • 折叠

摘要

Abstract

Optical path design of high power laser facilities should consider several optimization measures such as those that are related to image transmission, ghost avoidance, and stray light management. According to the diffraction optical propagation theory, we study the the influences of wavefront characteristics of large aperture optical components on optimizing the design parameters of optical path in view of increasing the output load. The results show that the arrangement interval of the last stage optical drive can be very useful in improving the output load of the laser facilities if it is controlled to be over 6 m long. In general, a large aperture optical element with a phase error peak value of 0.34λ can reduce the near field beam quality of a high-power laser by about 10% and give rise to a maximum decrease of about 21% when the phase error reaches 1.36λ. Superposition of multiple optical elements with different phase error distribution characteristics can reduce the negative effect of the mid frequency phase error. However,the nonlinear effect of large aperture optical components can aggravate the influence of the intermediate frequency phase error on the damage resistance capacity of the device. Under the premise that the damage threshold of the large caliber optical element is limited to 20 J/cm2,the using of a laser facility with a compact optical path,with an input laser energy density controlled to be below 16.8 J/cm2, will avoid damaging the optical components efficiently. A relatively flexible optical layout can further increase the average energy density of the final output laser and is very beneficial to the enhancing of the output load capacity of the laser facility.

关键词

衍射光学/元件波前/光路设计

Key words

diffraction optics/component wavefront/optical layout design

引用本文复制引用

徐林波,卢兴强,雷泽民..光学元件波前畸变对驱动器光路设计的影响[J].物理学报,2018,67(2):51-59,9.

基金项目

国家自然科学基金(批准号:60707019)资助的课题. Project supported by the National Natural Science Foundation of China (Grant No. 60707019). (批准号:60707019)

物理学报

OA北大核心CSCDCSTPCDSCI

1000-3290

访问量4
|
下载量0
段落导航相关论文