| 注册
首页|期刊导航|烟草科技|基于线性网络模型的卷烟吸阻及通风特征预测方法

基于线性网络模型的卷烟吸阻及通风特征预测方法

王乐 李斌 游敏 崔晓梦 易斌 郝喜良 刘欢 黄科 张明建 鲁端峰

烟草科技2017,Vol.50Issue(12):85-89,5.
烟草科技2017,Vol.50Issue(12):85-89,5.

基于线性网络模型的卷烟吸阻及通风特征预测方法

Method for predicting draw resistance and ventilation of cigarette based on linear network model

王乐 1李斌 1游敏 1崔晓梦 1易斌 2郝喜良 3刘欢 4黄科 5张明建 1鲁端峰1

作者信息

  • 1. 中国烟草总公司郑州烟草研究院,郑州高新技术产业开发区枫杨街2号450001
  • 2. 云南中烟工业有限责任公司技术中心,昆明市五华区红锦367号650231
  • 3. 江苏中烟工业有限责任公司,南京市梦都路28号210019
  • 4. 河南中烟工业有限责任公司,郑州市陇海路72号450000
  • 5. 四川中烟工业有限责任公司,成都市锦江区成龙大道1段56号610066
  • 折叠

摘要

Abstract

For predicting the relationship between draw resistance and ventilation of cigarette quickly, a linear network model was established according to the series or parallel relationship between cigarette components, then the draw resistance of cigarette, the ventilation rates of cigarette paper and filter, and the total ventilation rate of cigarette were calculated. The model was validated with the structural and physical parameters of 3R4F and slim cigarettes, the relative error between the predicted value and the detected value was calculated. It showed that the relative errors of draw resistance and total ventilation rate between the predicted values and detected values were less than 3%. The linear network model dispenses with either complicated numerical simulation or analytical calculation, quickly predicts the ventilation characteristics of cigarette and reveals the nonlinear relationships of ventilation characteristics with structural and physical parameters of cigarette accurately.

关键词

线性网络/3R4F卷烟/吸阻/通风特征/物性参数/结构参数

Key words

Linear network/3R4F cigarette/Draw resistance/Ventilation characteristic/Physical parameter/Structural parameter

分类

轻工纺织

引用本文复制引用

王乐,李斌,游敏,崔晓梦,易斌,郝喜良,刘欢,黄科,张明建,鲁端峰..基于线性网络模型的卷烟吸阻及通风特征预测方法[J].烟草科技,2017,50(12):85-89,5.

基金项目

中国烟草总公司细支烟重大专项项目"提高细支卷烟质量稳定性的关键工艺技术研究"[110201501010(XZ-01)] (XZ-01)

"细支卷烟燃烧状态的影响因素及与关键质量指标关系研究"[110201601010(XZ-01)]. (XZ-01)

烟草科技

OA北大核心CSCDCSTPCD

1002-0861

访问量0
|
下载量0
段落导航相关论文