电力系统保护与控制2018，Vol.46Issue(2)：137-143,7.DOI:10.7667/PSPC170012
基于即插即用的智能变电站信息自动校核技术
Automatic information verification technology of smart substation based plug and play
摘要
Abstract
The project configuration during the construction of smart substation is complex and the manual information checking work between the master station and the substation is heavy. In order to solve the problems, this paper proposes a method to extend the plug and play technology from the IED equipments within the substation to the substation control layer as well as the master station and substation, based on the research on the theory of plug and play and combined with intelligent technology of power system, realizing the plug and play technology of smart grid. To implement the mapping between the primary and secondary equipments through sharing technology of SCD (including SSD) model, thus realizing the interaction between the master station and the substation. Automatic check technology of information point table is realized and the depth of interaction between the master station and the substation is enhanced by use of substation functions as a service program. The method used can greatly reduce the substation manual labor complexity and improve the efficiency of smart substation construction through on-site verification.关键词
自动检核/即插即用/SSD建模/智能变电站/模型共享Key words
automatic verification/plug and play/SSD modeling/smart substation/sharing model引用本文复制引用
刘俊红,邓兆云,李泽科,李焕明..基于即插即用的智能变电站信息自动校核技术[J].电力系统保护与控制,2018,46(2):137-143,7.基金项目
This work is supported by Science and Technology Project of State Grid Corporation of China "Research on Plug and Play Key Technologies of Smart Substation and Control Master Station" (No. 52130416000M).国网公司科技项目"智能变电站与调控主站即插即用关键技术研究"(52130416000M) （No. 52130416000M）
