模具技术Issue(1)：10-15,6.
基于定模抽芯的某大型工具箱面盖注塑模设计
Design of injection mould of plastic toolbox cover based on the fixed mould core pulling mechanism
黄贤页 1郝彦琴 1赵利平2
作者信息
- 1. 怀化职业技术学院机械与汽车工程系,湖南怀化418000
- 2. 广东科技学院 机电工程系,广东 东莞 523083
- 折叠
摘要
Abstract
A large injection mould of a toolbox plastic cover was designed based on the analysis of the problems and defects of the mould processing,combining with the processing methods of the large mould and the key technology in the process of mould design.Its working principle is that the core pulling operation is carried out inside the mould through the use of a fixed-model slanted pushing rod and the air inside the mould is extruded by using the gap near the exhaust rod.The design of the mould structure is rational and the work is stable.关键词
定模抽芯/塑料工具箱面盖/注塑模/斜推杆Key words
fixed mold core pulling/plastic toolbox cover/injection mould/slanted pushing rod分类
矿业与冶金引用本文复制引用
黄贤页,郝彦琴,赵利平..基于定模抽芯的某大型工具箱面盖注塑模设计[J].模具技术,2018,(1):10-15,6.
