模具技术Issue(1)：39-45,7.
基于FASTAMP的汽车横梁支架拉延工艺设计及制件检测
Drawing process design and parts detection of automobile crossbeam support based on FASTAMP
摘要
Abstract
For the stamping process design of a certain type of car beam bracket,the forming limit diagram and thinning ratio in the forming process were predicted with the help of FASTAMP.The phenomcnon of wrinkling and drawing can be prevented by reasonable drawing process design.At the same time,thc overall structural scheme of drawing die was designed with UG software.And the designed stamping die was checked with assembling and production trial.The cloud data of the stamped part was obtained by using 3D scanner.The value conforming to the connection was obtained by using the Geomagic_Control X software which verify the rationality of stamping dic design.关键词
拉延成形/横梁支架/制件/检测Key words
drawing forming/crossbeam support/parts/testing分类
矿业与冶金引用本文复制引用
朱红萍,解萌..基于FASTAMP的汽车横梁支架拉延工艺设计及制件检测[J].模具技术,2018,(1):39-45,7.基金项目
江苏省高校品牌专业建设工程一期项目,机械制造与自动化品牌专业项目(PPZY2015B184). （PPZY2015B184）
