中国塑料2018，Vol.32Issue(1)：102-107,6.DOI:10.19491/j.issn.1001-9278.2018.01.017
基于CAE与正交试验法的工艺参数对翘曲变形的影响分析
Analysis of Effect of Injection-molding Process Parameters on Warpage Deformation of Printer Plastic Parts Based on CAE and Orthogonal Experiments
摘要
Abstract
The orthogonal experiment was conducted for a printer plastic part with metal inserts under different injection-molding conditions by using a CAE numerical simulation.The results indicated that the mold temperature,holding pressure and holding exhibited a minor effect on x-,y-and z-directional warp distortion,and the holding pressure,mold temperature and mold temperature also showed the significantly factors on x-,y-and z-directional warp distortions.r-,y-and z-directional warp distortions could be reduced by manufacturers through optimizing and adjusting the process parameters.关键词
针式打印机/注塑/工艺参数/优化/翘曲变形/金属嵌件Key words
needle printer/injection molding/process parameter/optimization/warpage deformation/metal insert分类
化学化工引用本文复制引用
刘成娟,刘成刚,刘艳,李延平..基于CAE与正交试验法的工艺参数对翘曲变形的影响分析[J].中国塑料,2018,32(1):102-107,6.基金项目
2017年福建省中青年教师教育科研项目(JAT171062) （JAT171062）
