现代制造工程Issue(11)：93-99,7.DOI:10.16731/j.cnki.1671-3133.2017.11.017
直线电动机进给系统滚动导轨结合面动态特性参数识别优化
Identification of dynamic characteristic parameters of joint surface on linear motor feed system considering rolling guide
摘要
Abstract
The joint surface of machine tools has an important influence on the dynamic and static characteristics of the whole machine.The identification of dynamic characteristic parameters of the joint surface is of great significance to improve the performance of the whole machine and shorten the development cycle.A method combining the LMS Test.Lab modal analysis and ANSYS response surface methodology was proposed to identify the dynamic characteristic parameters.The finite element model of linear motor feed system was established in ANSYS software based on the equivalent stiffness and damping value of joint surface,and the simulation modal analysis of the system was carried out.Modal experiment test was done by LMS Test.Lab.Comparison of simulated modal parameters and experimental modal parameters was done to modify the finite element model.In the end,the error of the experimental modal parameters and the simulated modal parameters is less than 8％,which verify the accuracy of the finite element model.关键词
结合面/动态特性/参数识别/LMS Test.Lab软件Key words
joint surface/dynamic characteristic/parameter identification/LMS Test.Lab software分类
机械制造引用本文复制引用
张亮,傅玉灿,杨路,朱鑫乐..直线电动机进给系统滚动导轨结合面动态特性参数识别优化[J].现代制造工程,2017,(11):93-99,7.基金项目
国家自然科学基金资助项目(51575270) （51575270）
江苏省大型工程装备检测与控制重点建设实验室项目(JSKLEDC201406) （JSKLEDC201406）
