现代制造工程Issue(11)：115-119,5.DOI:10.16731/j.cnki.1671-3133.2017.11.021
基于PLC的L形镍片自动上料机的设计
Design of automatic feeding machine for L-shaped nickel sheet based on PLC
摘要
Abstract
Automatic feeding machine for L-shaped nickel sheet is used in the production process of the battery protector,which can replace person to place L-shaped nickel sheet of right direction to the fixture.According to the particularity of the nickel plate structure,the whole structure of automatic feeding machine were designed,and the key components of the automatic feeding machine were designed and analyzed,including a feeding device,a straight-line feeding device,smart camera and four degree of freedom manipulator;the software and hardware of control system in automatic feeding machine was introduced,and design of the control system was completed.The prototype was debugged and tested,compared with the manual feeding method,the result shows that the overall performance of the automatic feeding machine designed is superior,the feeding rate is 90 ～ 100pcs/min,which is almost double the rate of artificial feeding;the qualified rate of the product can reach 99％,which is 8％ higher than that of the artificial feeding.关键词
L形镍片/自动上料机/电池保护器/可编程逻辑控制器Key words
L-shaped nickel sheet/automatic feeding machine/battery protector/PLC分类
社会科学引用本文复制引用
郭琳娜,郑天池,孙小刚,鞠家全,邱自学..基于PLC的L形镍片自动上料机的设计[J].现代制造工程,2017,(11):115-119,5.基金项目
南通大学自然科学资助项目(13H072) （13H072）
