现代制造工程Issue(11)：125-129,5.DOI:10.16731/j.cnki.1671-3133.2017.11.023
齿轮卧式滚磨光整加工方案设计及理论研究
Technical solution and theoretic research on barrel finishing of gears
谢盼新 1李文辉 2杨胜强 1雷洪2
作者信息
- 1. 太原理工大学机械工程学院,太原030024
- 2. 精密加工山西省重点实验室,太原030024
- 折叠
摘要
Abstract
Briefly introduces current methods of gear finishing technologies and points out advantages and disadvantages of existing processes.A technology of gear barrel finishing has been proposed which elaborates processing mechanism of this technology and gives priority to comphcated relative motion between the surface of the abrasive and the workpiece.A mathematical model has been established which derives formulation of calculating cutting speed and main factors that affect the processing effect are found theoretically.Analyzing the influence law of the factors by MATLAB.Using discrete element software EDEM,visually simulate abrasive particles in the system of the movement process and real-time observation of the movement of abrasive in the container.By comparing the abrasive particles on the tooth surface contact force under the different parameters,,laid the theoretical foundations for the experimental research and production application.关键词
齿轮/光整加工/切削速度/仿真Key words
gears/finishing/cutting velocity/simulation分类
机械制造引用本文复制引用
谢盼新,李文辉,杨胜强,雷洪..齿轮卧式滚磨光整加工方案设计及理论研究[J].现代制造工程,2017,(11):125-129,5.
