现代制造工程Issue(1)：109-113,5.DOI:10.16731/j.cnki.1671-3133.2018.01.021
温控器下壳体热流道注塑模具设计
The design of injection mold for thermostat lower casing with hot runner technology
摘要
Abstract
Thermostat lower casing have many problems,like buckling deformation,unequal shrinkage and so on.To solve these problems,use the Pro/E software and the Moldflow software to establish 3D models and make cavity design of the thermostat low-ering casing.Moreover,EMX is applied for formwork addition to accomplish the design of hot runner injection mold.The effective combination of structure of innovative design and hot runner technology could streamline the mold structure and compact the lay-out structure to result in a better forming quality.关键词
温控器/注塑模具/热流道技术/MoldflowKey words
thermostat/injection mold/hot runner technology/Moldflow分类
矿业与冶金引用本文复制引用
吴晶晶,李阳,范希营,单以波..温控器下壳体热流道注塑模具设计[J].现代制造工程,2018,(1):109-113,5.基金项目
江苏省产学研前瞻性联合研究项目(BY2016028-02) （BY2016028-02）
徐州市科技计划资助项目(KC16SG277) （KC16SG277）
江苏省高等学校大学生创新创业训练计划项目(201610320097X) （201610320097X）
