铸造技术2018，Vol.39Issue(1)：82-83,2.DOI:10.16410/j.issn1000-8365.2018.01.020
汽车张紧轮铸造工艺设计
Casting Process Design of Tension Pulley for Automobile
陈静 1李曙生 1李卫民1
作者信息
- 1. 泰州职业技术学院机电技术学院,江苏泰州225300
- 折叠
摘要
Abstract
Casting process of tension pulley for automobile was designed according to its structure characteristics,a top-pouring gating system was selected because the casting process was beneficial to the feeding of tension pulley castings.At the same time after pouring temperature and carbon equivalent of molten iron were controlled,the shrinkage defects of tension pulley castings was prevented.The results show that the production yield rate and qualified rate of tension pulley castings is higher with the design of casting process.关键词
张紧轮/铸造工艺/设计/顶注式浇注系统Key words
tension pulley/casting process/design/top-pouring gating system分类
金属材料引用本文复制引用
陈静,李曙生,李卫民..汽车张紧轮铸造工艺设计[J].铸造技术,2018,39(1):82-83,2.
