铸造技术2018，Vol.39Issue(1)：148-150,153,4.DOI:10.16410/j.issn1000-8365.2018.01.039
汽车板点焊接头检测与工艺参数研究
Detection and Processing Parameters of Spot Welding Joints for Automobile Plate
胡晓芳 1潘美玲 1张克利2
作者信息
- 1. 内蒙古交通职业技术学院汽车工程系,内蒙古赤峰024005
- 2. 内蒙古工业大学材料学院,内蒙古呼和浩特010051
- 折叠
摘要
Abstract
The morphology and hardness of automobile plate welding joint were detected,and using orthogonal experiment method,welding current,conduction time and electrode pressure as welding experimental factors,the spot welding process parameters of the car plate were optimized.The results show that the microstructure of fusion zone in automobile plate spot welding joint is coarse martensite structure,and the heat affected zone is mainly composed of fully austenitic region,part of the austenite region,and softening zone.The best welding current,conduction time and electrode pressure are 10 kA,400 ms,and 3 kN,respectively.关键词
点焊/显微组织/失效方式Key words
spot welding/microstructure/failure mode分类
矿业与冶金引用本文复制引用
胡晓芳,潘美玲,张克利..汽车板点焊接头检测与工艺参数研究[J].铸造技术,2018,39(1):148-150,153,4.
