铸造技术2018，Vol.39Issue(1)：182-185,4.DOI:10.16410/j.issn1000-8365.2018.01.049
机械臂用不锈钢热处理及其组织与性能研究
Study on Heat Treatment and Microstructure of Stainless Steel Mechanical Arm
唐仁奎 1廖丽 1杜华2
作者信息
- 1. 重庆科创职业学院信息与机电工程学院,重庆永川402160
- 2. 重庆大学材料科学与工程学院,重庆沙坪坝400044
- 折叠
摘要
Abstract
The microstructure,mechanical properties,tensile fracture morphology and corrosion resistance of the stainless steel mechanical ann under the condition of the original state,processing by the traditional dual phase region technique and the supersaturated single phases region technique were compared and analyzed.The results show that the tensile strength,reduction of area and microhardness of the stainless steel are higher than that of the original state in the process of double phase regiors and over saturation single phase process,the mechanical arm treated by the supersaturated single phase process can obtain better strength and plasticity;The corrosion resistance of the stainless steel from high to low is single phase sample,traditional dual phase sample and original sample.关键词
不锈钢/机械臂/热处理/组织/性能Key words
stainless steel/manipulator/heat treatment/microstructure/property分类
矿业与冶金引用本文复制引用
唐仁奎,廖丽,杜华..机械臂用不锈钢热处理及其组织与性能研究[J].铸造技术,2018,39(1):182-185,4.
