硅酸盐通报2018，Vol.37Issue(1)：122-128,7.
硅钙基固废原料配比及蒸养条件对硅酸钙板力学性能的影响
Effect of Raw Material Ratio of Silicon-Calcium Based Solid Wastes and Autoclaved Curing Conditions on Mechanical Property of Calcium Silicate Board
摘要
Abstract
The effect of raw material ratio and autoclaved curing condition on mechanical property and hydrated products of calcium silicate board was studied synergistically using calcium silicate slag(CSS), fly ash(FA),ordinary Portland cement(OPC)and desulfuriztion gypsum(DSG)as raw materials to prepare calcium silicate board.Moreover, the synergistic hydration process and microstructure of hydrated products were investigated by XRD, IR and SEM measurements.The results show that the optimal raw material ratio is 60% CSS, 24% FA, 10% OPC and 6% DSG; the optimal autoclaved curing condition is that curing temperature at 180 ℃ and holding time in 8 h.The flexural strength of calcium silicate board met the class-two requirement of Chinese Standard D1.3.Hydrated calcium silicate gel(C-S-H(I)), tobermorite and acicular xonotlite are successively generated from hydration of raw materials when improving the curing temperature.The strength of calcium silicate board is promoted by generation a large amount of tobermorite and xonotlite.关键词
工业固废/综合利用/蒸压养护/硅酸钙板/水化机理Key words
industrial solid waste/comprehensive utilization/autoclave curing/calcium silicate board/hydration mechanism分类
建筑与水利引用本文复制引用
曹永丹,李彦鑫,张金山,曹钊..硅钙基固废原料配比及蒸养条件对硅酸钙板力学性能的影响[J].硅酸盐通报,2018,37(1):122-128,7.基金项目
内蒙古自然科学基金(2017MS(LH)0521) （2017MS(LH）
内蒙古高等学校科学研究项目(NJZY17174) （NJZY17174）
内蒙古科技大学创新基金(2016XYPYL01) （2016XYPYL01）
