硅酸盐通报2018，Vol.37Issue(1)：327-331,5.
大粒径磨料作用下高铝砖气固冲蚀磨损的"粒径效应"
Particle Size Effects on Gas Solid Erosion Wear of High Alumina Bricks Impacted by Abrasives with Large Particle Size
摘要
Abstract
In order to study the effects of particle size with a wide range on erosion wear resistance performance and erosion wear mechanisms of targets,gas solid erosion tests were carried out with grade I high alumina bricks impacted vertically by brown fused alumina abrasives at room temperature, whose mean particle size were respectively 0.28 mm,0.40 mm,0.52 mm,and 0.80 mm,and microstructure on the worn surface of abrasives and targets were analyzed using scanning election microscope.Erosion models impacted by single and multiple particles were proposed to analysis the erosion behavior with different erodent particle size using ANSYS/LS-DYNA software.The results show that "Particle size effects"exist in grade I high alumina bricks,whose critical particle size is 0.40 mm.Maximum effective stresses of targets are increased with an increase in the particle size.Abrasives whose particle size is larger than 0.40 mm have been broken after the erosion process.The primary erosion wear mechanisms impacted by abrasives with particle size of 0.28 mm,0.40 mm and 0.80 mm are micro-cutting of matrix and aggregates,fracture of matrix and aggregates,and fracture of defects,respectively.关键词
气固冲蚀磨损/粒径效应/有限元模拟Key words
gas solid erosion wear/particle size effect/finite element simulation分类
通用工业技术引用本文复制引用
廉晓庆,隆万坤,徐菊花,贾瑞强,魏来严,彭龙贵..大粒径磨料作用下高铝砖气固冲蚀磨损的"粒径效应"[J].硅酸盐通报,2018,37(1):327-331,5.基金项目
陕西省自然科学基础研究计划一般项目(青年)(2017JQ5100) （青年）
西安科技大学博士启动金(2015QDJ014) （2015QDJ014）
西安科技大学培育基金(2014002) （2014002）
