首页|期刊导航|机械制造与自动化|基于有限元法对裂纹尖端应力强度因子的计算分析

基于有限元法对裂纹尖端应力强度因子的计算分析OACSTPCD

Calculation and Analysis of Crack Tip Stress Intensity Factor Based on Different Finite Element Methods

中文摘要英文摘要

应力在裂纹尖端会出现无限大的奇异性,但应力强度因子K则为有限值,是表征裂尖应力场强弱的物理参量.采用J积分法,位移外推法和相互作用积分法等3种不同的方法计算断裂模型裂尖的K值,并研究了受力、裂纹长度、含裂纹构件的几何参数等对裂纹尖端应力强度因子的影响.结果表明3种方法模拟出的K值结果一致性较好,与应力强度因子手册值相比都能达到较高精度.对照3种方法,分析出各种方法的优胜劣汰,对应用数值法计算应力强度因子方法的选择具有借鉴和参照作用.

The stress state at crack tip shows infinite singularily,but the stress intensity factor K is limited value,which represents its physical parameters to describe the strength of crack tip stress field. This paper uses three methods of J-integration,displacement extrapolation and interaction integraltion to calculate the K value on the crack tip and research on the influence of load, length of crack and geometric parameters of cracked parts on stress intensity…查看全部>>

袁浩;李菁;谢禹钧;侯汶雨

辽宁石油化工大学 机械工程学院,辽宁 抚顺113001黑龙江省北方工具有限公司 机械制造公司,黑龙江 牡丹江157000辽宁石油化工大学 机械工程学院,辽宁 抚顺113001中国石油天然气股份有限公司 抚顺石化分公司,辽宁 抚顺113001

机械制造

奇异单元应力强度因子相互作用积分法位移外推法J积分

singular elementstress intensity factorinteraction integration methoddisplacement extraplotion methodJ-integration method

《机械制造与自动化》 2018 (1)

146-151,6

10.19344/j.cnki.issn1671-5276.2018.01.040

评论

您当前未登录!去登录点击加载更多...