铸造技术2018，Vol.39Issue(2)：350-354,5.DOI:10.16410/j.issn1000-8365.2018.02.022
电液伺服驱动连铸结晶器非正弦振动控制系统设计
Design of Non-Sinusoidal Vibration Control System for Continuous Casting Mould Driven by Electro-Hydraulic Servo
摘要
Abstract
A kind of non-sinusoidal vibration control system that electro-hydraulic servo drive for ensuring mould that work stably and reliably was designed,and the central control unit based on the 32 bit embedded microprocessor.Realization of control strategy based on the PID algorithm,the controller communicated with PC by CAN bus.The design of monitoring system based on LabVIEW.The control algorithm of the control system is executed on PC,The host computer only monitors the status information of the mould,modifies the parameters and controls the switches,the controller can follow the vibration rule to operate the mould.At the same time,in order to avoid the impact of vibration to the mould during parameter modification process,using the ladder-type method to adjust parameter.关键词
连铸/结晶器/电液伺服/振动/STM32Key words
continuous casting/mould/electro-hydraulic servo/vibration/STM32分类
矿业与冶金引用本文复制引用
李文涛,李瑞刚,肖俊生,左鸿飞..电液伺服驱动连铸结晶器非正弦振动控制系统设计[J].铸造技术,2018,39(2):350-354,5.基金项目
国家自然科学基金资助项目(61463041) （61463041）
内蒙古科技大学校企合作项目(2016077) （2016077）
