环境工程学报2018，Vol.12Issue(1)：34-40,7.DOI:10.12030/j.cjee.201705093
负载型纳米CuO/MnO2催化剂的制备及催化氧化深度处理印染废水
Preparation of supported nano-CuO/MnO2 catalysts and their catalytic performance for advanced treatment of printing and dyeing wastewater
杨晶 1黄瑞敏 1谢春生 2陈磊 1张碗林1
作者信息
- 1. 华南理工大学环境与能源学院,广州 510006
- 2. 肇庆学院环境工程系,肇庆 526061
- 折叠
摘要
Abstract
The copper-manganese oxide catalysts supported on acid modified attapulgite (ATP) and activated carbon were prepared by a method of impregnation.The COD and color of dyeing wastewater secondary effluent were chosen as the treated object.The effects of the proportion of ATP and activated carbon,pH values as well as the dosage of H2O2 and the catalyst on the elimination efficiency of treated object were investigated.The structural properties of catalysts were characterized by SEM and XRD.The results showed that the COD and color reached the best removal efficiency which were 93％ and 90％,respectively,when the temperature was 25 ℃,the ratio of ATP and activated carbon of 2∶1,the amount of H2O2,two times of the theoretical amount,pH of 4,and catalyst dosage of 15 g · L-1 The copper and manganese oxides were dispersed on the surface of the catalysts in the form of nano particles and the active components were CuO and MnO2.关键词
凹凸棒土/活性炭/负载/CuO/MnO2催化剂/印染废水Key words
attapulgite/activated carbon/support/CuO/MnO2 catalyst/dyeing wastewater分类
资源环境引用本文复制引用
杨晶,黄瑞敏,谢春生,陈磊,张碗林..负载型纳米CuO/MnO2催化剂的制备及催化氧化深度处理印染废水[J].环境工程学报,2018,12(1):34-40,7.
