中国舰船研究2018，Vol.13Issue(1)：106-113,8.DOI:10.3969/j.issn.1673-3185.2018.01.016
船用直驱式容积控制正车执行机构的设计方法
Design method for marine direct drive volume control ahead actuator
王海洋 1王冲 2鞠东兵3
作者信息
- 1. 海军参谋部综合办公室,北京100071
- 2. 哈尔滨船舶锅炉涡轮机研究所,黑龙江哈尔滨150078
- 3. 海军驻哈尔滨船舶锅炉涡轮机研究所军事代表室,黑龙江哈尔滨150078
- 折叠
摘要
Abstract
[Objectives]In order to reduce the size,weight and auxiliary system configuration of marine ahead actuators,this paper proposes a kind of direct drive volume control electro-hydraulic servo ahead actuator.[Methods]The protruding and indenting control of the servo oil cylinder are realized through the forward and reverse of the bidirectional working gear pump,and the flow matching valve implements the self-locking of the ahead actuator in the target position.The mathematical model of the ahead actuator is es-tablished,and an integral separation fuzzy PID controller designed.On this basis,using AMESim software to build a simulation model of the ahead actuator,and combined with testing,this paper completes an anal-ysis of the control strategy research and dynamic and static performance of the ahead actuator.[Results] The experimental results agree well with the simulation results and verify the feasibility of the ahead actua-tor's design.[Conclusions]The research results of this paper can provide valuable references for the inte-gration and miniaturization design of marine ahead actuators.关键词
船用汽轮机/执行机构/电液伺服/容积控制Key words
marine turbine/actuator/electro-hydraulic servo/volume control分类
交通工程引用本文复制引用
王海洋,王冲,鞠东兵..船用直驱式容积控制正车执行机构的设计方法[J].中国舰船研究,2018,13(1):106-113,8.
