安徽工程大学学报2018，Vol.33Issue(1)：47-51,64,6.
消失模铸造模样材料结构及其燃烧性能研究
Study on Material Structure and Combustion Performance of Expendable Pattern Casting
摘要
Abstract
The specific surface area and microstructure of EPS and STMMA were analyzed by means of the NOVA 2000e specific surface area and pore size analyzer,SEM and differential thermogravimetric a-nalysis.It measured the influence of temperature and time on the combustion of the two kinds of materi-als.The results show that compared with EPS,STMMA has larger specific surface area,smaller particle size,and more cellular micropores.At the same burning time,STMMA burned faster with fewer residues. Under the same temperature,the residual rate of EPS and STMMA decreased with the increase of com-bustion time,but the residual rate of STMMA is smaller.The castings produced by STMMA have no black slags while machined deep to around 5 mm,and the defects of black slags on the bottom of EPS is greatly reduced.关键词
消失模铸造/比表面积/微观结构/燃烧性能Key words
expendable pattern casting/specific surface area/microstructure/combustion performance分类
矿业与冶金引用本文复制引用
白明雪,朱协彬,尹博,陈志浩,徐达义,赵军..消失模铸造模样材料结构及其燃烧性能研究[J].安徽工程大学学报,2018,33(1):47-51,64,6.基金项目
安徽省自然科学青年基金资助项目(1308085QE86) （1308085QE86）
