水利水电技术2018，Vol.49Issue(2)：56-62,7.DOI:10.13928/j.cnki.wrahe.2018.02.009
重力坝参数化设计系统开发
Development of parametric design system for gravity dam
摘要
Abstract
In order to reduce manual calculation effort in gravity dam design,promote design efficiency,this paper proposes a 3d parametric design method of gravity dam based on CATIA two development,to realize the design of gravity dam efficiently and rapidly.Through the profile of the non overflow dam section,the anti sliding stability and stress analysis,CATIA automatic three-dimensional modeling,fast drawing,automatic mesh generation and ANSYS finite element calculation,finally "gravity aided design" function module customized for CATIA.Also the method is applied to the design and analysis of a gravity dam project,the results of the application are consistent with the theoretical value,proved the program is reliable;and the program time is far lower than that of artificial time-consuming,which prove that the program can improve the work efficiency.The feasibility of this method is verified by engineering example,although the research object of this method is non-overflow dam section,but the method also can be used for overflow dam section,and other type of dam or other component,so this method has a certain promotion value.关键词
水利工程/重力坝非溢流坝段/参数化设计/CATIA二次开发/ANSYSKey words
water conservancy project/non-overflow dam section/parametric design/CATIA secondary development/ANSYS分类
水利科学引用本文复制引用
王文进,朱亮亮,赵钦,何敏,黑新宏..重力坝参数化设计系统开发[J].水利水电技术,2018,49(2):56-62,7.基金项目
国家自然科学基金项目(51408488) （51408488）
陕西省科技统筹创新工程计划项目(2015KTZDGY01-04) （2015KTZDGY01-04）
