烟草科技2018，Vol.51Issue(2)：82-86,5.
ZJ112卷接机组SE烟条输送通道自动清洁装置的设计
Design of automatic cleaning device for SE tobacco rod conveying channel in ZJ112 cigarette maker
姜冬子 1王金晨 1褚洪国 1丁宁1
作者信息
- 1. 山东中烟工业有限责任公司济南卷烟厂,济南市高新区科航路2006号 250104
- 折叠
摘要
Abstract
In order to reduce the failure rate and equipment cleaning time,an automatic cleaning device for SE tobacco rod conveying channel in ZJ112 cigarette maker was designed,wherein a pneumatic cylinder pushed a cutting knife to cut off the tobacco rod quickly,and compressed air was introduced into the front section of the microwave source and the U-shaped guide respectively to blown any residues off the microwave source channel when the machine was stopped. Based on the master PLC of ZJ112,the control system adopted backup input/output address and controlled cleaning process through programming. Test running was carried out on cigarette brand"Mount Tai(Red General)"in Jinan Cigarette Factory,the results showed that the quality of cigarettes was not affected by the installation of the said automatic cleaning device. The effective cleaning rate reached 98.61% after machine shutdown,and cleaning duration reduced by 10.4 s. The cleaning device decreases operators'labor intensity and promotes machine efficiency.关键词
ZJ112卷接机组/烟条/微波源/输送通道/PLC/自动清洁Key words
ZJ112 cigarette maker/Tobacco rod/Microwave source/Conveying channel/PLC/Automatic cleaning分类
轻工纺织引用本文复制引用
姜冬子,王金晨,褚洪国,丁宁..ZJ112卷接机组SE烟条输送通道自动清洁装置的设计[J].烟草科技,2018,51(2):82-86,5.
