可再生能源2018，Vol.36Issue(4)：496-500,5.
摩擦因数和模辊直径比对生物质环模成型机产量影响的研究
Study on the in fluence of friction factor and the diameter ratio of die-roll on productivity of biomass ring die forming machinery
摘要
Abstract
Biomass energy has the characteristics of renewability, widespread and rich reserves. Biomass compact forming technique is one of the biomass energy conversion modes. Biomass ring die is the main compact forming machinery. As the main technical parameter of ring die, it is important to research the production. Through the analysis of the material grab process of compression roller and ring die, the relationship between the biggest grab angle and the friction factor of ring die and material is deduced,and the relationship between the biggest grab angle and the friction factor of roller and material is also deduced. In combination with the friction characteristics of material and the geometry of ring die, establish the functional relationship between maximum press height and maximum grab angle, research the influencing mechanism of the friction factors of material and the diameter ratio of die-roll to production, the model of the maximum theoretical productivity of ring die forming machinery is obtained.关键词
致密成型/模辊直径比/攫取角/压料高度/生产率Key words
compact forming/diameter ratio of die-roll/grab angle/press height/productivity分类
能源科技引用本文复制引用
李震,刘彭,高雨航..摩擦因数和模辊直径比对生物质环模成型机产量影响的研究[J].可再生能源,2018,36(4):496-500,5.基金项目
国家自然科学基金项目(51666016) （51666016）
内蒙古自然科学基金项目(2016MS054). （2016MS054）
