热力发电2018，Vol.47Issue(2)：114-119,137,7.DOI:10.19666/j.rlfd.201708085
绝热压缩空气储能系统Aspen Plus软件自定义蓄热器模块设计及应用
Design and application of custom regenerator module in Aspen for adiabatic compressed air energy storage system
摘要
Abstract
Aiming at the problem that there is no regenerator module in Aspen Plus,a design method of custom regenerator module based on Aspen Plus is proposed in this study.The model of regenerator module is programmed by using Fortran programming language.Then the regenerator module is embedded into the compressed air energy storage system,and the two-stage compression and two-stage expansion of the advanced adiabatic compressed air energy storage system is calculated,then the related parameters of each node are obtained.The results show that the relative error of calculation between the original splicing module and designed module of Aspen Plus is less than 5％,which proves the correctness of the interface design.Besides,this embedding method of custom regenerator module can be used to the design of other modules.The design and implementation of this new module are conducive to the simplification and convenience of process simulation,which lays a foundation for further research on compressed air energy storage system.关键词
绝热/压缩空气储能系统/模块设计/Fortran语言/蓄热器/Aspen Plus软件Key words
adiabatic/compressed air energy storage system/module design/Fortran programming language/regenerator/Aspen plus software分类
能源科技引用本文复制引用
何青,贾明祥,康浩强,刘文毅..绝热压缩空气储能系统Aspen Plus软件自定义蓄热器模块设计及应用[J].热力发电,2018,47(2):114-119,137,7.基金项目
国家重点研发计划资助(2017YFB0903601)National Key Research and Development Program of China (2017YFB0903601) （2017YFB0903601）
