现代电子技术2018，Vol.41Issue(8)：10-12,16,4.DOI:10.16652/j.issn.1004-373x.2018.08.003
基于五轴平台的非展开曲面导电图形3D打印方法
A five-axis platform based 3D printing method of non-expanded curved surface conductive graphics
赵家勇 1刘大川 1赵鹏兵 1黄进 1谢鹏志 2宫剑 2刘朋朋2
作者信息
- 1. 西安电子科技大学,陕西 西安710000
- 2. 中国电子科技集团公司 第三十三研究所,山西 太原030000
- 折叠
摘要
Abstract
The non-expanded curved surface conductive graphics is a specific graphics formed on the non-expanded curved surface with conductive properties,whose preparation is one of the key steps of manufacturing conformal antennas,frequency se-lective surfaces and wearable electronic products. Traditionally,the method of first making a conductive plane graph and then splicing is universally adopted,but it has some defects such as low forming precision and poor electrical conductivity. There-fore,a 3D printing method based on five-axis linkage platform and jet printing technology is proposed for non-expanded curved surface conductive graphics. The corresponding processes and equipment were developed. The experimental results show that the forming precision of non-expanded curved surface conductive graphics prepared based on the proposed method is ±0.1 mm,the thickness uniformity error is less than 4%,and the conductivity can be up to 1×107S/m,which provides an effective technical way for manufacturing conformal microstrip antennas with good performance and frequency selective surfaces.关键词
非展开曲面/导电图形/五轴联动/喷印技术/三维打印方法/微带天线/频率选择表面Key words
non-expanded curved surface/conductive graphics/five-axis linkage/jet printing technology/3D printing method/microstrip antenna/frequency selective surface分类
信息技术与安全科学引用本文复制引用
赵家勇,刘大川,赵鹏兵,黄进,谢鹏志,宫剑,刘朋朋..基于五轴平台的非展开曲面导电图形3D打印方法[J].现代电子技术,2018,41(8):10-12,16,4.
