中国塑料2018，Vol.32Issue(3)：85-91,7.DOI:10.19491/j.issn.1001-9278.2018.03.014
PBS/PLA/滑石粉3D打印线材制备及熔融沉积成型工艺研究
Study on Preparation and Fused Deposition Modeling Technology of PBS/PLA/Talc Filament for 3D Printing
摘要
Abstract
Poly(lactic acid) (PLA) and talc powder were used to modify poly(butylene succinate)(PBS),and then a PBS/PLA/talc composite filament was prepared for fused deposition modeling (FDM).The effect of PLA content on 3D printing processability was investigated by crystallinity analysis,rheological behavior,mechanical performance,scanning electron microscopy and 3D printing effect.The experimental results indicated that the crystallization temperature of PBS decreased by 5 ℃ with an increase of PLA content,but the complex viscosity and storage and loss moduli increased gradually in the presence of PLA.Moreover,with increasing PLA content,the tensile strength and notched impact strength of the composite decreased by 1.71 MPa and 2.63 kJ/m2,respectively.The fracture surface of tensile specimens also became rougher.3D printing process parameters for PBS/PLA/talc composite filament was investigated by a FDM method.The results indicated that the printing effect was improved with the addition of PLA.The warpage was improved significantly when the plate temperature exceeded 110 ℃,and meanwhile,the tensile strength increased with an increase of printing temperature.关键词
聚丁二酸丁二醇酯/聚乳酸/滑石粉/三维打印线材/熔融沉积成型Key words
poly(butylene succinate)/poly(lactic acid)/talc/printing filament/fused deposition modeling分类
化学化工引用本文复制引用
周运宏,夏新曙,杨松伟,黄宝铨,陈庆华,肖荔人..PBS/PLA/滑石粉3D打印线材制备及熔融沉积成型工艺研究[J].中国塑料,2018,32(3):85-91,7.基金项目
国家重点研发计划项目(2016YFB0302300) （2016YFB0302300）
