电焊机2018，Vol.48Issue(3)：153-155,3.DOI:10.7512/j.issn.1001-2303.2018.03.28
板管T型接头自动化焊接工艺开发
Development of automatic for plate and tube T joint welding process
陈经纬 1樊亚斌 1付瑶 1李辰生 1赵锋1
作者信息
- 1. 中车唐山机车车辆有限公司,河北唐山063035
- 折叠
摘要
Abstract
This paper aims at the problem of the repeated repair in welding of bogie beam tube and longitudinal beam when face in the weld depth isn't enough.It is different from the way in the past in which increase the current to add the welding depth.This paper proposes that use the advantage of automatic welding robot.To weld the plate ofT joint through using the methods of the welding of pull the arc which it is hard to manual welding,using the special command to adjust arc shape,using the different welding position when welding the different layer.It is achieve the target that only increase welding depth but no additional current,and reduced the welding stress and welding deformation,which it can be useful for the similar welds of automatic welding robot.关键词
转向架/T型接头焊接/自动焊接机器人Key words
bogie/T joint welding/automatic welding robot分类
矿业与冶金引用本文复制引用
陈经纬,樊亚斌,付瑶,李辰生,赵锋..板管T型接头自动化焊接工艺开发[J].电焊机,2018,48(3):153-155,3.
