| 注册
首页|期刊导航|电子器件|基于PCM的长线多码率高速信号接收系统设计

基于PCM的长线多码率高速信号接收系统设计

郑润 甄国涌 刘东海 郭慧玉

电子器件2018,Vol.41Issue(2):366-370,5.
电子器件2018,Vol.41Issue(2):366-370,5.DOI:10.3969/j.issn.1005-9490.2018.02.017

基于PCM的长线多码率高速信号接收系统设计

The Design of Long-Term Multiple Bit Rate Transmission Receiving Circuit at a High Speed

郑润 1甄国涌 1刘东海 1郭慧玉1

作者信息

  • 1. 中北大学技术国家重点实验室,太原030051
  • 折叠

摘要

Abstract

In order to improve the problems the telesignaling transmission distance is short,transmission rate is a single in traditional telemetry system. A receiving system is designed based on the PCM long-term high speed multi-rate. This receiving system uses FPGA programmable logic devices as PCM Telemetry Demodulator. Under the control of its internal logic,it achieves decoding to PCM signal. Demodulated data are transfered to the computer through the PCI bus for analyzing and drawing;or recorded in storage for data recovery and back to read. It can realize serial data transmission via 60 m shielded twisted-pair cable,limit distance is 200 m,the received signals are two different bit rates of PCM data. After testing the relevant parameters,the results show that the system can transmit stability,accurate receive data,it has anti-jamming ability,and obtains the desired goals.

关键词

遥测PCM码/双码率/60m长线/解码接收/存储系统

Key words

PCM telemetry demodulator/multiple bit rate/60 m shielded twisted-pair/decode reception/storage

分类

信息技术与安全科学

引用本文复制引用

郑润,甄国涌,刘东海,郭慧玉..基于PCM的长线多码率高速信号接收系统设计[J].电子器件,2018,41(2):366-370,5.

电子器件

OA北大核心CSTPCD

1005-9490

访问量0
|
下载量0
段落导航相关论文