河南城建学院学报2018，Vol.27Issue(1)：42-49,8.DOI:10.14140/j.cnki.hncjxb.2018.01.008
使用达索Component Family和CAA二次开发进行桥墩批量BIM建模
Batch BIM modeling method of Pier based on component family and CAA of dassault system
摘要
Abstract
The traditional model of pier BIM based on knowledge pattern and action can realize batch model-ing,but due to multiple generation of model references,the instantiation process is slow and the database memory garbage is easily generated.In order to overcome the above defects,this paper proposes a new model-ing method,which first uses the component family module of the cable system to decompose the pier-level tem-plate into a two-level template separated from the database,and then develops a batch instantiation program of the pier by CAA,The program can retrieve the necessary model reference from the database according to sev-eral attribute values of the bridge Pier template,and generate the corresponding model instance to place in the skeleton coordinate system,so as to establish the whole bridge pier model quickly.The results show that this modeling method can greatly improve the modeling efficiency and save the database memory space,this paper also provides the basic thinking and method for other BIM research based on/CAA two development.关键词
BIM/达索/CAA/桥墩/二次开发Key words
BIM/dassault system/CAA/pier/secondary development分类
建筑与水利引用本文复制引用
齐成龙,王永..使用达索Component Family和CAA二次开发进行桥墩批量BIM建模[J].河南城建学院学报,2018,27(1):42-49,8.基金项目
中国铁路设计集团有限公司科技开发课题(721770) （721770）
