机械科学与技术2018，Vol.37Issue(4)：505-509,5.DOI:10.13433/j.cnki.1003-8728.2018.0403
锂电池原材料预处理至涂布工艺方案设计
Design of Pretreatment Process and Coating Process for Raw Material of Lithium Battery
摘要
Abstract
In order to improve the efficiency and quality of lithium battery slurry preparation,on the basis of the existing process plan,this paper designs a vacuum continuous pulping process which can realize from the raw material pretreatment process of lithium ion power battery to the coating process by automatic.Using the method of geometric weighted AHP to build the transfer matrix method,the paper carries out the reliability analysis to evaluate the scheme of three kinds of pulping process and the design of vacuum continuous pulping.The results show that:the key factors influencing the quality of slurry are the degree of automation of the pulping system,the process of mixing and dispersing and the pretreatment of raw materials.comparing with the existing technology,the process has some advantages.Based on the conclusion of geometric weighted AHP method,the key equipment of vacuum continuous pulping process is researched,and finally the schematic diagram of vacuum slurry preparation system is obtained.关键词
锂离子动力电池/原材料预处理/几何加权AHP法/真空连续制浆Key words
automatic process/reliability analysis/transfer matrix method/schematic diagram of system分类
机械制造引用本文复制引用
靳美娜,刘纯祥,李朝,刘琴,关玉明..锂电池原材料预处理至涂布工艺方案设计[J].机械科学与技术,2018,37(4):505-509,5.基金项目
天津市科技特派员项目(14JCTPJC00532)资助 （14JCTPJC00532）
