| 注册
首页|期刊导航|煤田地质与勘探|基于煤层底板等高线的逆断层叠覆区全自动三角剖分

基于煤层底板等高线的逆断层叠覆区全自动三角剖分

魏竹斌 李青元 张明辉 刘洁 李青

煤田地质与勘探2018,Vol.46Issue(1):28-34,7.
煤田地质与勘探2018,Vol.46Issue(1):28-34,7.DOI:10.3969/j.issn.1001-1986.2018.01.005

基于煤层底板等高线的逆断层叠覆区全自动三角剖分

Method of full-automatic triangulation for reverse faults with overlapping area based on coal seam floor contour map

魏竹斌 1李青元 2张明辉 1刘洁 1李青3

作者信息

  • 1. 中国矿业大学(北京)地球科学与测绘工程学院,北京100083
  • 2. 中国测绘科学研究院地理信息工程重点实验室,北京100830
  • 3. 辽宁工程技术大学测绘工程与地理科学学院,辽宁阜新123000
  • 折叠

摘要

Abstract

Triangulation for stratigraphic interface including reverse faults with overlapping area is a difficult problem in the field of 3D geological modeling.To solve this problem,based on coal seam floor contour map,an automatic triangulation method by adding outer surrounding ring of overlapping area is presented.Based on the idea of dividing the overlapping area in the local area,this method firstly uses fault lines to form some surrounding rings by equidistant extrapolation which enclose each reverse fault with overlapping area respectively,then uses the outer surrounding ring to cut and divide the stratigraphic interface into a parent region with several inner holes and a number of reverse faults with overlapping area surrounded by the outer surrounding ring.Secondly,for every overlapping area,the lines connecting the two end points of fault line are extended to the outer surrounding ring so that the overlapping area is divided into single-connected upper-wall zone and lower-wall zone;the conventional Constrained Delaunay Triangulation is carried out in the upper-wall zone,lower-wall zone and parent zone respectively and then the zones are spliced together.Finally,all the auxiliary outer surrounding rings added before and triangles linked with outer surrounding ring are removed and triangulation network is reconstructed in local area to realize automatic triangulation of reverse faults with overlapping area.According to the results of actual data test,this method can achieve the triangulation of the reverse fault with overlapping area that has not been completely cut off fully automatically.

关键词

逆断层/叠覆区/三角剖分/包围环/三维地质建模

Key words

reverse fault/overlapping area/triangulation/surrounding ring/3D geological modeling

分类

天文与地球科学

引用本文复制引用

魏竹斌,李青元,张明辉,刘洁,李青..基于煤层底板等高线的逆断层叠覆区全自动三角剖分[J].煤田地质与勘探,2018,46(1):28-34,7.

基金项目

国家自然科学基金项目(41272367)National Natural Science Foundation of China(41272367) (41272367)

煤田地质与勘探

OA北大核心CSCDCSTPCD

1001-1986

访问量0
|
下载量0
段落导航相关论文