硅酸盐通报2018，Vol.37Issue(2)：541-546,6.
双层电解质极限电流型氧传感器的制备及其性能
Preparation and Properties of Limiting Current Oxygen Sensor with Bilayer Electrolyte
摘要
Abstract
A new limiting current oxygen sensor using LaNi0.6Fe0.4O3-δ (LNF) as dense diffusion barrier and 8YSZ (8mol％ Y2O3 + ZrO2) and Ce0.9 Gd0.1O1.95 (GDC) as electrolyte layer was developed successfully via co-pressing and co-sintering method.The influences of temperature and oxygen content on oxygen sensitive characteristic for oxygen sensor were measured.The results indicate that the sensors exhibit better current plateaus at 800-820 ℃ with oxygen concentration varying from 0.3％ to 1.2％.The response/recovery times of oxygen sensor are about 35 s and 45 s,respectively.The limiting current has a good lihear relationship with oxygen concentration.And the curves of log(IL · T)-1/T for oxygen sensor are linear correlation.关键词
氧传感器/极限电流/双层电解质/致密扩散障层Key words
oxygen sensor/limiting current/bilayer electrolyte/dense diffusion barrier分类
信息技术与安全科学引用本文复制引用
梁斌,周芬,谢敏,郜建全,包金小,宋希文..双层电解质极限电流型氧传感器的制备及其性能[J].硅酸盐通报,2018,37(2):541-546,6.基金项目
国家自然科学基金(51464038) （51464038）
内蒙古自治区高等学校科学研究项目(NJZY14168) （NJZY14168）
