| 注册
首页|期刊导航|太原理工大学学报|二阶层级自相似六边形蜂窝的面内压缩行为

二阶层级自相似六边形蜂窝的面内压缩行为

于国际 李飞鹏 李世强 吴桂英

太原理工大学学报2018,Vol.49Issue(3):494-500,7.
太原理工大学学报2018,Vol.49Issue(3):494-500,7.DOI:10.16355/j.cnki.issn1007-9432tyut.2018.03.021

二阶层级自相似六边形蜂窝的面内压缩行为

In-plane Compressive Behavior of a Self-Similar Second Order Hierarchical Hexagonal Honeycomb

于国际 1李飞鹏 2李世强 1吴桂英3

作者信息

  • 1. 太原理工大学应用力学与生物医学工程研究所,材料强度与结构冲击山西省重点实验室,太原030024
  • 2. 太原理工大学材料科学与工程学院,太原030024
  • 3. 湖南大学 汽车车身先进设计制造国家重点实验室,长沙410082
  • 折叠

摘要

Abstract

The in-plane compressive behaviors of a self-similar second order hierarchical hon-eycomb (SOHH)were simulated by means of finite element simulation using ABAQUS,the de-formation modes of SOHH at different impact velocities were studied,the analytical models of SOHH for calculating plateau stress were established according to energy balance,and theoretical results had good agreement with simulations.Research results show that three deformation modes of SOHH were observed at different impact velocities,that is,quasi-static mode (X Mode),transitional mode (V Mode)and impact mode (I Mode).Impact velocity occupied the main effect on in-plane deformation modes of SOHH,with increasing impact velocity,deforma-tion mode of SOHH transformed from quasi-static mode to impact mode gradually.SOHH was obtained by introducing a hierarchical structure into an ordinary honeycomb,and the deformation of first order cell wall of SOHH was a combination of rotation and shortening under in-plane com-pression.

关键词

层级蜂窝/数值模拟/变形模式/理论模型/冲击

Key words

hierarchical honeycomb/numerical simulation/deformation mode/analytical model/impact

分类

数理科学

引用本文复制引用

于国际,李飞鹏,李世强,吴桂英..二阶层级自相似六边形蜂窝的面内压缩行为[J].太原理工大学学报,2018,49(3):494-500,7.

基金项目

国家自然科学基金资助项目(11602161) (11602161)

山西省自然科学基金资助项目(201601D021025) (201601D021025)

湖南大学汽车车身先进设计制造国家重点实验室开放基金资助项目(31615008) (31615008)

太原理工大学学报

OA北大核心CSTPCD

1007-9432

访问量0
|
下载量0
段落导航相关论文